Honeycomb Cardboard Box

A typical carton pallet weighs about 3–6 kg, against 15–25 kg for wood. It has no nails or splinters, nests for shipment, and does not need heat treatment. It is not assumed equal to a heavy timber pallet on long-term racking unless that grade is tested.

Yes. ISPM-15 applies to solid wood packaging. This pallet is paper, so it can export without fumigation or an HT stamp. The site also describes it as ISPM-15 compliant for that reason.

The load depends on deck thickness, cell size, foot design, and whether the load is static, dynamic, or racked. Send the deck size and the load for a rated build. Do not assume a figure from the material name alone.

Yes. It is paper-based and can go into cardboard recycling where local rules allow, if free of film, foam, or contaminated adhesive.

Closed cells slow moisture movement better than an open corrugated pallet. Untreated kraft is not waterproof and loses strength when wet. A moisture-resistant face can be specified for humid routes.

Decks are custom. Common export sizes are 1200 × 800 mm and 1200 × 1000 mm. Entry can be two-way or four-way, set by the foot layout.

Nested in stacks, so the shipment is flatter than assembled wooden pallets. Nine-block and four-block styles are both used.

Deck length and width, static and dynamic load, racking if any, entry sides, kraft or coated face, quantity, and destination.

The HS code used for export is 4823909000

The lead time is 7 days after PO confirmation.

Samples are free of charge. Freight is paid by the customer.